Some graphic controllers which are not VGA compatible take the output from a VGA controller and map it to their display as a way to provide boot information and VGA compatibility. Registered memory are not supported. Intruder Detection This item allows you to enable or disable intruder detection. This chipset manage bus speeds and access to system memory resources, such as DRAM. When enabled, the typematic rate and typematic delay can be configured. The Main Menu allows you to select from several setup functions.

Uploader: Sataur
Date Added: 1 December 2018
File Size: 8.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 24743
Price: Free* [*Free Regsitration Required]

Biostar 865GV Micro 478 Drivers

Half defaultFull. State after power on. Enabled Virus protection is activated.

Typematic Delay Msec Sets the delay time after the key is held down before it biosfar to repeat the keystroke. SATA is operating in legacy mode. Supports Intel Hyper-Threading Technology.

Biostar GV Owner’s Manual |

Fast default Lets chipset control Gate A Plug in the power cord and boot up the system. We strongly recommend you verify every speed you overclock by click the Verify button.

During Disabled, you cannot use this function. Blank Screen This option only writes blanks to the video buffer. Backing up the hard drive is extremely important. With a user-friendly Status Animation, it can represent 3 overclock percentage 865yv CPU fan is rotated normally. Driver Installation To install the driver, please click on the Driver icon.


The rest of this manual is intended to guide you through the process of configuring your system using Setup. The first hard drive should always be connected to IDE1. Hard disk can be read 85gv applications can be used but booting from hard disk 2. Setup default A password is required to access the Setup Utility only. When this area is reserved it cannot be cached. Enabled default Enable cache.

Intruder Biostr This item allows you to enable or disable intruder detection.

Select version supported by the operation system running on this computer. If this function is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Keyboard lights are on, power indicator lights are lit, and hard drive is spinning.

When not disabled, each of the ranges are from 1 min. With the Overclock Manager, users can easily adjust the frequency they prefer or they can get the best CPU performance with just one click. Normal A pin in the keyboard controller controls Gate A Every peripheral device has a node, which is called ESCD. 4478 Bus Ratio Represents the frequency. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports.


Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly with the boot sequence. Execute the setup execution file, and then the following dialog will pop up. This chipset manage bus speeds and access to system memory resources, such as DRAM.

TM2 Bus VID Represents the voltage of the throttled performance state that vg be initiated when the on-die sensor gose from not hot to hot.